Hubbell 20Amp Flanged Receptacle, 3-Pole, 4-Wire Grounding |
(Model # HBL2426) Note: Picture may not represent the actual product. We are continuously working on improving our website and reserve the right to change specifications, availability, and pricing without prior notice. 20Amp flanged receptacle, 3-Pole, 4-wire grounding.
Features:
- Device Type: flanged receptacle
- Device Style: twist-lock
- Amperage: 20A
- Volts: 3Ø 250V AC
- Poles and Wires: 3 Pole, 4 wire grounding
- Design Type for Flanged Inlets and Receptacles: non-metallic
- Configuration Type: L15-20R
- Horsepower: 3
- Terminal Retainer Material: clear polycarbonate
- Terminal Clamp Material: .08" (2) steel-nickel plated
- Terminal Screw Material: #10-32 brass (white finish on neutral screw when used) multi-drive
- Ground Screw Material: #10-32 brass (green finish) multi-drive
- Body Holding Screw Material: steel, zinc plated multi-drive
- Body Contact Carrier Material: natural white nylon
- Contact Spring Material: brass
- Spring Binding Plate Material: brass
- Flanged Casing Material: natural white nylon
- Mounting Screw Material: Nickel-plated brass round head screws
- Ground Contact Material: .031" (.8) brass
- Ratings: molded into face
- Dielectric Voltage Withstand: 2,000V minimum
- Current Interrupting: certified for current interrupting at full rated current
- Temperature Rise: Max 30C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of .75
- Terminal Accommodation: 20A #12 AWG
- Terminal Identification: Terminals identified in accordance with UL 498 (X, Y, Z, White, Green)
- Flammability: HB or better per UL 94 or CSA 22.2 No. 0.6
- Operating Temperatures: maximum continuous 75 C minimum -40 C (without impact)
| |
|