Hubbell Pedestal Series Painted Aluminum 2 Inch Through-Floor Fitting Poke-Through |
| (Model # PT27A) Note: Picture may not represent the actual product. We are continuously working on improving our website and reserve the right to change specifications, availability, and pricing without prior notice. Pedestal Series Painted Aluminum 2" Through-Floor Fitting Poke-Through complies with UL 514A requirements for scrub water protection and is a Fire-Rated Poke-Through.
Through-Floor Fitting Features:
- Through-floor fitting to be installed in a 2" diameter hole - Pedestal Series Mounting
- Contains 3/4" EMT tube for low-voltage cabling and 1/2" EMT tube for power wiring for use with Hubbell FR280, FR480 and FR880 series pedestals
- This unit will accommodate floor thicknesses of 2 1/4" to 7"
- Fire Rating: For use in 1, 1 1/2, 2, 3, or 4 hour rated unprotected reinforced concrete floors or in 1, 2, or 3 hour rated floors employing steel floor units and concrete topping (D900 series design)
- UL Installation Spacing: Minimum of 2' on centers and not more than one unit per 65 sq. ft. of floor area in each span
- Power Wiring Capacity: 1/2" EMT Power Tube Handles: Up to ten #12 AWG type THHN wires OR Up to six #12 AWG and two #10 AWG type THHN wires
- Voice/Data Wiring Capacity: 3/4" EMT Low-Voltage Tube Handles: Up to two 25 pair telephone/data cables (100 #22 AWG telephone/data conductors) OR Up to two IBM Type 2 data cables
- Total Allowable Copper Cross Sections: 0.11 sq. in.
- Pedestal Rule of Thumb: Any combination of wire that does not exceed the total allowable copper cross sectional area is acceptable
- Pedestal Series Listing: Outlet Box: E31999, Fire Resistance: R8429
| |
|
Email Page
